Part Number Hot Search : 
NZH16C JMC261 UPC2903 4CMC19 FZT749NL 55100 62256 TP533507
Product Description
Full Text Search
 

To Download EM8D100L Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 05223
EM8D-100L
Only One Name Means ProT ek'TionTM
EMI FIL TER/TVS ARRA Y
APPLICA TIONS Cellular Phones Color LCD Display Panel Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPA TIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns FEA TURES ESD Protection > 25 kilovolts Bidirectional EMI Filtering/TVS Low Pass Filters Protects Up to Eight(8) Data Lines RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS
Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed)
DFN-16
DFN-16 Package
Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245C Pure-Tin - Sn, 100: 260-270C Flammability rating UL 94V-0 Lead-Free Finishing Available Device Marking: Marking Code 12mm Tape and Reel Per EIA Standard 481
PIN CONFIGURA TION
For Each Line
I/On 100 Ohm I/On
1
2
3
4
5
6
7
8
GND
10pF GND 10pF
16 15 14 13 12 11 10
BOTTOM VIEW
9
Note: I/O connected from pins 1-16, 2-15, 3-14, 5-12, 6-11, 7-10 and 8-9.
05223.R2 1/06
1
www.protekdevices.com
EM8D-100L
DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified
PARAMETER Operating Temperature Storage Temperature DC Power Per Resistor Typical Resistance @ 15% SYMBOL TJ TSTG P R VALUE -40C to 85C -55C to 150C 100 100 UNITS C C mW OHMS
ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified
PART NUMBER DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION TYPICAL CUT-OFF FREQUENCY CAPACITANCE PER LINE (50 OHMS I/O) (See Note 1) ZERO BIAS
VWM VOLTS EM8D-100L M8D 10L 5.0
@ 1mA V(BR) VOLTS 6.0
@ 3V ID A 0.1
@10mA VF VOLTS 0.8
@ 800-3000 MHz dB 25
fc MHz 150
@2.5V, 1MHz C pF 20
Note 1: 20% tolerance.
FIGURE 1 INSERTION LOSS
0 -5 -10
Gain (dB)
-15 -20 -25 -30 -35 0.1 1 10 100
2.5 Volts
0 Volts
1000
10000
Frequency (MHz)
05223.R2 1/06
2
www.protekdevices.com
EM8D-100L
GRAPHS
FIGURE 2 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25C)
1.6
Cj - Capacitance (Normalized)
1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6
VR - Reverse Voltage - Volts
1.100
FIGURE 3 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C)
Normalized Resistance
1.060
1.020
0.980
0.940
0.900 -40 -20 0 20 40 Temperature C 60 80 100
FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE
35
5 Volts per Division
25
15
5
-5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform)
05223.R2 1/06
3
www.protekdevices.com
EM8D-100L
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
D
PACKAGE DIMENSIONS
MILLIMETERS DIM A A1 A3 b D E E2 E3 E4 e K L MIN 0.74 0.00 0.178 0.18 3.91 1.50 0.40 2.92 3.07 0.46 0.33 0.18 MAX 0.84 0.05 0.228 0.25 4.11 1.70 0.50 3.18 3.33 0.56 0.40 0.28 INCHES MIN 0.029 0.00 0.007 0.007 0.154 0.059 0.016 0.115 0.121 0.018 0.130 0.007 MAX 0.033 0.002 0.009 0.009 0.162 0.067 0.020 0.125 0.131 0.022 0.160 0.011
E Pin 1 Reference TOP VIEW A3 A SIDE VIEW A3
A1
L 1
NOTES: 1. Controlling dimensions in millimeters 2. Dimensino b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. TAPE & REEL ORDERING NOMENCLATURE
e 8 E3 E2 E4 16 9 BOTTOM VIEW b
K
1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 12mm tape, i.e., EM8D-100L-T7 3. Suffix-T13 = 13 Inch Reel - 12,000 pieces per 12mm tape, i.e., EM8D-100L-T13 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., EM8D-100L-LF-T7.
Outline & Dimensions: Rev 1 - 9/05, 06056
Tape & Reel Specifications (Dimensions in millimeters)
Reel Dia. 178mm (7")/330mm(13") Tape Width 12mm A0 1.9 0.10 B0 K0 D E F W P0 P2 P tmax 0.25
4.30 0.10 1.00 0.10 1.50 0.10 1.75 0.10 3.50 0.05 12.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10
P0 10 Pitches Cumulative Tolerance on Tape. 0.2
t
D
P2
E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot
F
W
P
User Direction of Feed
COPYRIGHT (c) ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com
05223.R2 1/06
4
www.protekdevices.com


▲Up To Search▲   

 
Price & Availability of EM8D100L

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X